2. Safety
Safety & Certification
Safety Requirements
Imaje disclaims all responsibility regarding the CE directive if
the printer is used, altered or installed in any way other than
described in this manual.
This symbol is used to indicate circumstances that may be
dangerous to the user or that cause damage to the equipment.
Please Note the Following Warnings:
• The MP Nova printers have double fuses. The fuses are
rated at 250 volt, 4.0 A, AT-type. Fuses must be UL-
approved.
• The circuit board contains a battery. Used batteries
should be disposed of in accordance with the manu-
facturer’s instructions.
• Please read all instructions before using the printer for
the first time.
• The printer should be connected to the power supply
indicated on the voltage plate. If you are unsure of the
type of power supply available, please contact Imaje
service personnel.
• The printer is equipped with a plug suitable for earthed
sockets. This is a safety measure. If the plug does not fit
the power socket, a qualified electrician must replace it.
• We do not recommend the use of extension cables.
• The power cable must not be subjected to pressure.
Ensure that the printer is not placed anywhere where
the cable can be stood on.
To Next Page
Loading...
Need help?
General