DEEP SEA ELECTRONICS DSECONTROL DSE7000 Series User Manual

DSE Model 7000 Series Control & Instrumentation System Operators Manual
Part No. 057-074 7000 Series OPERATING MANUAL ISSUE 2 02/05/2008 ADM 71
12.1.2 DSE7300 SERIES
If you require additional plugs from DSE, please contact our Sales department using the part numbers below.
7000 series terminal designation Plug description Part No.
1-11 11 way 5.08mm 007-451
15-19 5 way 5.08mm 007-445
22-30 9 way 5.08mm 007-167
39-46 8 way 7.62mm 007-454
47-50 4 way 7.62mm (Not fitted to DSE7310) 007-171
51-56 6 way 5.08mm 007-446
60-67 8 way 5.08mm (DSE7300 series only) 007-164
RS485 3 way 5.08mm 007-174
PC Configuration interface lead
(USB type A – type B)
016-125
NOTE:- Mains sensing (Terminals 47-50) is not fitted on DSE7310 autostart controller.
12.2 PURCHASING ADDITIONAL FIXING CLIPS FROM DSE
Item Description Part No.
7000 series fixing clips (packet of 4) 020-294
12.3 PURCHASING ADDITIONAL SEALING GASKET FROM DSE
Item Description Part No.
7000 series silicon sealing gasket 020-507

DEEP SEA ELECTRONICS DSECONTROL DSE7000 Series Specifications

General

Brand	DEEP SEA ELECTRONICS
Model	DSECONTROL DSE7000 Series
Category	Control Unit
Language	English