Dell Axim X30 User Manual

www.dell.com | support.dell.com
108 Getting Connected
Creating a Modem Connection
1 Install a modem card and appropriate adapters to connect an external
modem to your device through the serial port.
2 Obtain the following information from your ISP:
• ISP dial-up access telephone number
• Username and password
• CP/IP settings
Some ISPs require information in front of the username, such as
MSN/username .
3 Tap t h e Start button → Settings → Connections tab → Connections .
4 Under My ISP or My Work Network , tap Add a new
modem connection
.
5 Enter a name for the connection, such as ISP Connection .
6 From the Select a modem list, select your modem type, and tap Next .
If your modem type does not appear, try reinserting the modem card. If
you are using an external modem that is connected to your device with
a cable, select
Hayes Compatible on COM1 .
7 Enter the access phone number and tap Next .
8 Enter your user name, password, and, if applicable, your domain.
NOTE: You should not need to change any settings in Advanced. Most ISPs
now use a dynamically assigned address.
9
If the ISP you are connecting to does not use a dynamically
assigned address, tap
Advanced , tap the TCP/IP tab, and then enter
the address.
10 Ta p Next .
11 Select other appropriate options and tap Finish .
U7216bk0.book Page 108 Thursday, September 30, 2004 2:03 PM

Dell Axim X30 Specifications

General

Brand	Dell
Model	Axim X30
Category	PDA
Language	English