CD/DVD Drive
Removing a CD/DVD Drive
1. Follow the procedures in Before You Begin.
2. Pull up on the drive release latch and slide the drive towards the back of the computer. Then, lift up to remove the drive from the computer.
3. Disconnect the power and data cables from the back of the drive.
4. Replace the computer cover. See Replacing the Computer Cover.
5. Connect your computer and devices to electrical outlets, and then turn them on.
Installing a CD/DVD Drive
1. Follow the procedures in Before You Begin.
2. Unpack the drive and prepare it for installation.
3. If you are installing a new drive:
a. Press the two snaps on the top of the drive-panel insert and rotate the insert toward the front of the computer. Remove it from the computer.
NOTICE: To connect a network cable, first plug the cable into the network port or device, and then plug it into the computer.