17" LCD Color Monitor Dell E178FPC
12
User Preset
Use the +/- buttons to increase or decrease each of the three colors (R, G, B)
independently, in single digit increments, from '0' to '100'.
NOTE: 'Color temperature' is a measure of the 'warmth' of the image colors
(red/green/blue). The two available presets ('Blue' and 'Red') favor blue and red
accordingly. Select each one to see how each range suits your eye; or utilize the
'User Preset' option to customize the color settings to your exact choice.
OSD Settings:
Horizontal Position
Vertical Position
OSD Hold Time
OSD Lock
Each time the OSD opens, it displays in the same location on the screen. 'OSD
Settings' (horizontal/vertical) provides control over this location.
- and + buttons move OSD to the left and right.
- and + buttons move OSD down and up.
The OSD stays active for as long as it is in use.
'OSD Hold Time': Sets the length of time the OSD will remain active after the last
time you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60
seconds
NOTE: Default 'OSD hold time' is 20 seconds.
Controls user access to adjustments. When 'Yes' (+) is selected, no user
adjustments are allowed. All buttons, except Menu, are locked.
All buttons can be locked or unlocked. Press the 'Menu' button for over 15
seconds to unlock the OSD menu.
NOTE: When the OSD is locked, pressing the 'Menu' button will take the user
directly to the 'OSD settings' menu, with 'OSD Lock' preselected on entry. Select
'No'(-) to unlock and allow user access to all applicable settings.
To Next Page
Loading...
Need help?
General
