Removing the computer base
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
4 Remove the memory modules.
5 Remove the wireless card.
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 8 in “Removing the palm rest".
8 Follow the procedure from step 1 to step 6 in “Removing the system
board".
9 Follow the procedure from step 1 to step 3 in “Removing the thermal
cooling assembly".
10 Follow the procedure from step 1 to step 3 in “Removing the I/O board”.
11 Remove the display assembly.
12 Follow the procedure from step 1 to step 3 in “Removing the power-
adapter port”.
Procedure
After removing all the parts in the prerequisites, we are left with the computer
base.
91
To Next Page
Loading...
Need help?
General
