12 | Removing the Battery
Removing the Battery
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before Working Inside Your
Computer" on page 9. After working inside your computer, follow the instructions
in "After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Close the display and turn the computer over.
2 Slide the battery latches outward to unlock the battery. You hear a click when the
battery is unlocked.
3 Lift and remove the battery off the computer base.
4 Turn the computer over and open the display as far as possible.
5 Press and hold the power button for 5 seconds, after the computer is unplugged,
to
ground the system board.
1 battery 2 battery latches (2)
book.book Page 12 Wednesday, October 2, 2013 3:11 PM
To Next Page
Loading...
Need help?
General