Setting Up a Network 55
Setting Up a Network
Physically Connecting to a Network or Broadband Modem
Before you connect your computer to a network that is not wireless, the computer must have a network
adapter installed and a network cable connected to it.
To connect a network cable:
1
Connect the network cable to the network adapter connector on the back of your computer.
NOTE: Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is
securely attached.
2
Connect the other end of the network cable to a network connection device or a network wall
connector.
NOTICE: Do not use a network cable with a telephone wall connector.
book.book Page 55 Friday, December 21, 2007 3:22 PM
To Next Page
Loading...
Need help?
General