Option Description
NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the
Advanced Battery Charge Configuration option.
Sleep mode
● OS Automatic selection—enabled by default
Force S3
Type-C
connector power
● 7.5 Watts
● 15 Watts—enabled by default
POST behavior screen options
Option
Description
Adapter
Warnings
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
Default setting: Enable Adapter Warnings
Keypad
(Embedded)
Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.
● Fn Key Only—default.
● By Numlock
NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only mode.
Mouse/Touchpad Allows you to define how the system handles mouse and touch pad input. The options are:
● Serial Mouse
● PS2 Mouse
● Touchpad/PS-2 Mouse: This option is enabled by default.
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Key Emulation Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
Extended BIOS
POST Time
Allows you to create an extra preboot delay. The options are:
● 0 seconds—enabled by default.
● 5 seconds
● 10 seconds
Full Screen Log
● Enable Full Screen Logo—not enabled
Warnings and
errors
● Prompt on warnings and errors—enabled by default
● Continue on warnings
● Continue on warnings and errors
System Setup 79
To Next Page
Need help?
General
Weight and Dimensions
