Dell Networking S3100 Series User Manual

Figure 24. Four-Post Threaded Configuration
Installing a 1U Two-Post
You can install the switch in 1U two-post (flush and center) configurations. Slide the system into the rails
in the same manner as the four-post configurations.
Installing a 1U Front-Rack
To install the switch in a 1U front-rack configuration, configure the rails that are attached to the system.
1. Attach the switch rails (inner chassis members) to the switch. Item 3 in the following illustration
shows the detail for the front standoff with the locking tab.
Installation
33

Dell Networking S3100 Series Specifications

General

Brand	Dell
Model	Networking S3100 Series
Category	Switch
Language	English