Dell Networking S6000 System User Manual

Installing the Software 25
6
Installing the Software
Navigating CLI Modes
The FTOS prompt changes to indicate the CLI mode. You must move linearly
through the command modes, with the exception of the end command which
takes you directly to EXEC Privilege mode and the exit command which moves
you up one command mode level.
Console Access
NOTE: You must have a password configured on a virtual terminal line before you
can Telnet into the S6000 system. Therefore, use a console connection when
connecting to the system for the first time. Before starting this procedure, be sure
you have a terminal emulation program already installed on your PC.
The RS-232 console port is labeled on the upper right-hand side of the S6000
system as you face the input/output (I/O) side of the chassis ( Figure 6-1 ).
Figure 6-1. RS-232 Console Port
1- RS-232 console port

Dell Networking S6000 System Specifications

General

Brand	Dell
Model	Networking S6000 System
Category	Switch
Language	English