EasyManuals Logo
Home>Dell>Laptop>P135G

Dell P135G User Manual

Dell P135G
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Steps
1. Remove the two screws (M2x2) that secure the M.2 2280 solid-state drive thermal plate to the palm-rest and keyboard
assembly.
2. Slide and remove the M.2 2280 solid-state drive thermal plate off the palm-rest and keyboard assembly.
NOTE: A thermal pad is included with the solid-state drive thermal plate and must always be adhered to the plate. If in
the process of replacing the solid-state drive, the thermal pad is separated from the thermal plate or gets adhered to
the solid-state drive, readhere the thermal pad to the solid-state drive thermal plate before reinstalling the thermal plate
to the system.
3. Slide and remove the M.2 2280 solid-state drive from the M.2 card slot on the system board.
Installing the M.2 2280 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the M.2 2280 solid-state drive and provide a visual representation of the
installation procedure.
Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide and place the M.2 2280 solid-state drive into the M.2 card slot on the system board.
3. Place the M.2 2280 solid-state drive thermal plate on the M.2 2280 solid-state drive.
NOTE:
A thermal pad is included with the solid-state drive thermal plate and must always be adhered to the plate. If in
the process of replacing the solid-state drive, the thermal pad is separated from the thermal plate or gets adhered to
the solid-state drive, readhere the thermal pad to the solid-state drive thermal plate before reinstalling the thermal plate
to the system.
4. Align the screw hole on the M.2 2280 solid-state drive thermal plate with the screw hole on the palm-rest and keyboard
assembly.
5. Replace the two screws (M2x2) to secure the M.2 2280 solid-state drive thermal plate to the palm-rest and keyboard
assembly.
Removing and installing components
25

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell P135G and is the answer not in the manual?

Dell P135G Specifications

General IconGeneral
BrandDell
ModelP135G
CategoryLaptop
LanguageEnglish

Related product manuals