24 | Setting Up the Monitor
Connecting the Monitor for DP Multi-Stream Transport (MST)
function
Secondary Monitor Primary Monitor
NOTE: Supports the DP MST feature. To make use of this feature, your PC
Graphics Card must be certified to DP1.2 with MST option.
Using the Mobile-High Definition Link (MHL)
NOTE: This monitor is MHL ready.
NOTE: To use the MHL function, use only MHL certified cable and source devices
that support MHL output.
NOTE: Some MHL source devices may take more than a few seconds or longer to
output an image, depending on MHL source devices.
NOTE: When the connected MHL source device enters standby mode, the monitor
displays a black screen or the message below, depending on MHL source device’s
output.
To enable MHL connection, please perform the below steps:
1 Plug the power adapter to your monitor and to a power outlet.
2 Connect the (micro) USB port on your MHL source device to HDMI (MHL) port
on the monitor with a MHL certified cable (see Bottom View for details).
To Next Page
Loading...
Need help?
General
