Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the keyboard cable and the backlight cable into the connectors on
the system board and press down on the latches to secure the cables.
2 Turn over the keyboard.
3 Slide the tabs on the keyboard into the slots on the palm-rest assembly
and snap the keyboard into place.
Post-requisites
Replace the battery.
40
To Next Page
Loading...
Need help?
General
