Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the optical drive.
3 Remove the base cover.
4 Remove the hard drive.
5 Remove the wireless card.
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 7 in ”Removing the computer
base".
8 Remove the display assembly.
9 Remove the display bezel.
Procedure
1 Disconnect the camera cable from the camera.
2 Using a plastic scribe, gently pry the camera from the display back-cover.
91
To Next Page
Loading...
Need help?
General
