Removing the battery-status
light cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
NOTE: The battery-status light cable is an assembly that includes LED
indicators and a digital-array microphone.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Peel o the tape that secures the battery-status light cable to the keyboard-
controls board.
2 Open the latch and disconnect the battery-status light cable from the keyboard-
controls board.
3 Peel o the tape that secures the battery-status light cable to the palm-rest
assembly.
40
To Next Page
Loading...
Need help?
General
