Replacing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
NOTE: The antenna is included as part of the display assembly. However,
the antenna can be replaced separately.
Procedure
1 Align the screw holes on the antenna with the screw holes on the display
assembly.
2 Replace the four screws (M2x4) that secure the antenna to the display
assembly.
Post-requisites
1 Replace the display hinge cover.
2 Replace the display assembly.
3 Replace the battery.
4 Replace the base cover.
67
To Next Page
Loading...
Need help?
General
