18 Using the Baseboard Management Controller
www.dell.com | support.dell.com
IPMI 2.0 Command Support List
The following tables include all commands defined in the IPMI v2.0 specifications. All mandatory
commands and some optional functions are supported. Special functions beyond the scope of IPMI
v2.0 are implemented as original equipment manufacturer (OEM) commands.
In the O/M column:
M = Mandatory in the IPMI spec and is implemented.
O = Optional command supported in this implementation.
N = Not supported in this implementation.
Table 1-9. Options Menu Items
Menu Options Description
Bandwidth Regulate the network bandwidth setting.
Video Settings Adjust the video resolution.
Table 1-10. IPMI Device Global and Broadcast Commands (NETFUN: 06H, 07H)
Commands NetFn CMD O/M Supported
Get Device ID App 01H M Yes
Cold Reset App 02H O Yes
Warm Reset App 03H N No
Get Self Test Results App 04H M Yes
Manufacture Test On App 05H O Yes
Set ACPI Power State App 06H O Yes
Get ACPI Power State App 07H O Yes
Get Device GUID App 08H O Yes
Broadcast Commands:
Broadcast ‘Get Device ID’ App 01H N No
Table 1-11. BMC Messaging Support
Commands (NETFUN: 06H, 07H)
Commands NetFn CMD O/M Supported
Set BMC Global Enables App 2EH M Yes
Get BMC Global Enables App 2FH M Yes
Clear Message Buffer Flags App 30H M Yes
To Next Page
Loading...
Need help?
General