Dell PowerEdge R210 User Manual

96 Installing System Components
Installing a Processor
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 If you are upgrading your processor, prior to upgrading your system,
download and install the latest system BIOS version from
support.dell.com . Follow the instructions included in the file download to
install the update on your system.
2 Unpack the processor if it has not been used previously.
If the processor has already been used, remove any thermal grease from the
top of the processor using a lint-free cloth.
3 Align the p rocessor with the socket keys on t he ZIF socket. See
Figure 3-16.
CAUTION: Positioning the processor incorrectly can permanently damage the
system board or the processor. Be careful not to bend the pins in the socket.
4 With the release lever on the processor socket in the open position, a lign
the
p rocessor with the socket keys and set the processor lightly in the
socket.
CAUTION: Do not use force to seat the processor. When the processor is
positioned correctly, it engages easily into the socket.
5 Close the processor shield.
6 R otate the socket release lever down until it snaps into place.
7
Using a clean lint-free cloth, remove the thermal grease from the heat sink.
8 Open the grease packet included with your processor kit and apply thermal
grease evenly to the center of the top of the new processor.
CAUTION: Using excess thermal grease can cause grease to contact the
processor shield, which can cause contamination of the processor socket.
9 Place the heat sink on the processor. See Figure 3-15 .
10 Using a #2 Phillips screwdriver, tighten the heat-sink retention screws.
See
Figure 3-15 .
book.book Page 96 Wednesday, August 12, 2009 4:51 PM

Dell PowerEdge R210 Specifications

General

Tcase	72.6 °C
Bus type	DMI
Stepping	C2
FSB Parity	No
Processor cache	4 MB
Processor cores	2
Processor model	i3-530
System bus rate	2.5 GT/s
Processor family	Intel® Core™ i3
Processor series	Intel Core i3-500 Desktop Series
Processor socket	LGA 1156 (Socket H)
Processor threads	4
Processor codename	Clarkdale
Execute Disable Bit	Yes
Motherboard chipset	Intel® 3420
Processing Die size	81 mm²
Processor frequency	2.93 GHz
Processor cache type	Smart Cache
Processor lithography	32 nm
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	- MHz
Processor operating modes	64-bit
Graphics & IMC lithography	45 nm
PCI Express configurations	1x16, 2x8
Supported instruction sets	SSE4.2
Thermal Design Power (TDP)	73 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	22
Physical Address Extension (PAE)	36 bit
Maximum number of PCI Express lanes	16
Memory types supported by processor	DDR3 1066/1333
Number of Processing Die Transistors	382 M
Memory channels supported by processor	Dual
Memory bandwidth supported by processor (max)	21 GB/s
Maximum internal memory supported by processor	16 GB
HDD size	3.5 \
RAID support	-
Optical drive type	DVD-RW
Total storage capacity	250 GB
Maximum storage capacity	2 TB
Memory slots	4x DIMM
Internal memory	2 GB
Memory clock speed	1333 MHz
Buffered memory type	Unregistered (unbuffered)
Internal memory type	DDR3-SDRAM
Memory layout (slots x size)	2 x 1 GB
Maximum graphics card memory	8 MB
On-board graphics card model	Intel® HD Graphics
On-board graphics card base frequency	733 MHz
I/O ports	1x PCIe x16 G2
Graphics card	G200eW
Dimensions (WxDxH)	431 x 393.7 x 42.6 mm
Non-operating relative humidity (non-condensing)	5 - 95 %
Networking features	Gigabit Ethernet
PS/2 ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express slots version	2.0
Power supply	250 W
Power requirements	100 - 240 V
Compatible operating systems	Windows SQL Server 2008 R2/Small Business Server 2008/Essential Business Server 2008/Foundation R2/Server 2008 SP2/Server 2008 R2, Novell, Linux.
Chassis type	Rack (1U)
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Processor ARK ID	46472

Weight and Dimensions

Depth	393.7 mm
Width	431 mm
Height	42.6 mm