Dell PowerEdge R510 Technical Guide

Dell
PowerEdge R510 Technical Guide 48
Table 15. Summary of Power Management Features
Feature
Type
Enable/Status/ Ctrl
bit location
Description
ACPI Mode
Switch
Fixed
ICH-10
The OS uses the SCI_EN bit in ICH to switch from legacy mode to
ACPI mode.
Sleep States
Fixed
ICH-10
Supported states: S0 (Working), S4-OS (Hibernation in Windows
OS), and S5 (Soft-off).
S1 (also called standby or suspend) and S3 are not supported.
Power Button
Fixed
ICH-10
In ACPI mode, OS has control of the power button. In non-ACPI
mode, SMI handler owns power button events.
Real-Time
Clock
Fixed
ICH-10
The OS is able to configure the system to wake on the RTC
alarm.
Power Mgmt.
Timer
Fixed
ICH-10
ICH-10 24-bit power management timer is used.
Power Mgmt.
Event (PME)
Generic
ICH-10
Each host bus’ PME# signal is routed to a separate general-
purpose event pin in the chipset. When a device signals PME#,
the system wakes (if necessary), the OS detects the event, and
a Dell defined ASL routine handles the event. Wake-on-LAN is
one example of a PME.
USB wake
Generic
N/A
This feature is not supported on this system since the S1 state is
not supported.
OS DBS
N/A
Processor MSRs
This feature does P state transition under Windows
C State Support
Fixed and
Generic
Processor MSR and
ICH-10 registers
This feature allows multiple C state support for Processor. This
feature works under Windows and any ACPI OS that understand
C states.
Power Profile
support
N/A
Processor/MCH and
ICH-10 chipset
registers.
11G Servers are the most energy-smart servers that Dell ships.
In addition to P, C, and T states, BIOS exposes the Power
Profiles to the OS. Each Power Profile has specific settings and
fine tunes the processor (MCH, IOH and South Bridge).
Current Power Profiles that 11G BIOS exposes in BIOS setup are detailed in the following table. The Active
Power Controller mode is the default mode.

Dell PowerEdge R510 Specifications

General

HDD size	3.5 \
Hot-swap	Yes
HDD capacity	450 GB
HDD interface	Serial Attached SCSI (SAS)
Total storage capacity	900 GB
Number of HDDs installed	2
Number of HDDs supported	8
Internal memory	4 GB
Memory clock speed	1066 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	64 GB
Tcase	76 °C
Bus type	QPI
Stepping	D0
FSB Parity	No
Processor code	SLBF6
Processor cache	8 MB
Processor cores	4
Processor model	E5540
System bus rate	5.86 GT/s
Processor series	Intel Xeon 5500 Series
Processor socket	Socket B (LGA 1366)
Processor codename	Nehalem EP
Motherboard chipset	Intel® 5500
Processing Die size	263 mm²
Processor frequency	2.53 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	42.5 x 45 mm
Processor front side bus	- MHz
Processor boost frequency	2.8 GHz
Processor operating modes	64-bit
Thermal Design Power (TDP)	80 W
CPU multiplier (bus/core ratio)	19
Number of Processing Die Transistors	731 M
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800, 1066 MHz
Memory bandwidth supported by processor (max)	25.6 GB/s
Maximum internal memory supported by processor	144 GB
PS/2 ports quantity	0
Serial ports quantity	1
USB 2.0 ports quantity	6
Display	LCD
L1 cache	0.064 MB
Form factor	-
Graphics card	G200eW
Dimensions (WxDxH)	86.4 x 436.6 x 609.6 mm
Compatible operating systems	Microsoft Windows Small Business Server 2008/2003/ Novell SUSE Linux Enterprise Server 11/10 SP2 Linux Red Hat Enterprise 5.3/4.7 VMware vSphere Version 4.0 VMware ESX v3.5 / ESXi v3.5
Power consumption (typical)	1100 W
Noise level	42 dB
Chassis type	Rack (2U)
PCI Express x4 slots	3
Processor ARK ID	37104
Intel® Turbo Boost Technology	1.0

Weight and Dimensions

Weight	13500 g