Name: Dell SE2723DS
Brand: Dell
Rating: 5 (1 reviews)

To Next Page

To Previous Page

28 │ Setting up the monitor

Setting up the monitor

Attaching the stand

NOTE: The stand is not installed at the factory when shipped.

NOTE: The following instructions are applicable only for the stand that

was shipped with your monitor. If you are attaching a stand that you

purchased from any other source, follow the setup instructions that

were included with the stand.

To attach the monitor stand:

1. Remove the stand riser and the stand base from the cushion that secures it.

2. Connect the stand base to the stand riser.

3. Open the screw handle on the stand base and tighten the screw to secure the

stand riser to the stand base.

4. Close the screw handle.

5. Open the protective cover on the monitor to access the slot on the monitor.

Questions and Answers:

Need help?

Do you have a question about the Dell SE2723DS and is the answer not in the manual?

Dell SE2723DS Specifications

General