Setting up the monitor │ 35
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the
stand, ensure that the monitor is placed on a soft surface and handle it
carefully.
NOTE: The following steps are specifically for removing the stand that
is shipped with your monitor. If you are removing a stand that you
purchased from any other source, follow the setup instructions that
are included with the stand.
To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Open the screw handle on the stand riser and loosen the screw by turning it
anti-clockwise.
3. Slide the stand assembly out of the monitor.
1
2
To Next Page
Loading...
