Dell UltraSharp 38 User Manual

Setting up the monitor  │  47
Connecting the monitor for DPBS for the first time
For the first time setting up the DPBS function:
1. Mak
e sure both the PC and the monitor are OFF.
2. Pr
ess the monitor power button to turn ON the monitor.
3. Conne
ct the USB-C cable from the PC to the monitor.
4. Bo
th the monitor and PC will turn ON normally. If not, press either the monitor
power button or PC power button to boot up the system.
NOTE: Ensure that Dell Power Button Sync is set to On. See Dell Power
Button Sync.

Dell UltraSharp 38 Specifications

General

Screen Size	37.5 inches
Resolution	3840 x 1600
Panel Type	IPS
Aspect Ratio	21:9
Refresh Rate	60 Hz
Brightness	300 cd/m²
Contrast Ratio	1000:1
Color Support	1.07 billion colors
Connectivity	USB-C, HDMI, DisplayPort
VESA Mount	100 x 100 mm
Response Time	5 ms (gray to gray)
Ports	HDMI, DisplayPort, USB-C, USB 3.0
Speakers	2x 9W
Viewing Angle	178° (H) / 178° (V)
Color Gamut	99% sRGB
Adjustability	Height, tilt, swivel