21
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The display doesn't work Be sure it is plugged in and that the
electrical outlet is working
The safety device may have switched o
the appliance
Plug into the power outlet
Remove the obstruction and let the appliance
cool down. If the appliance doesn't work please
contact
De'Longhi Customer Service
The appliance doesn't
warm up
The temperature may be set too low
Set the temperature to a higher value
The display shows: +
unit o
(Probe failure 1)
It indicates that the room temperature
sensor has failed
Please contact De'Longhi Customer Service
The display shows: +
unit o
(Probe failure 2)
It indicates that the probe of the internal
safety of the device has failed
Please contact De'Longhi Customer Service
The display shows: Ht
(High temperature)
The unit has reached a too high internal
temperature
Check that the unit is not covered
and let the
appliance cool down
. When the product internal
temperature decreases, the alarm will disappear.
If the appliance still doesn't work, please contact
DeLonghi Customer Service.
The display shows:
and unit is o
The tip-over switch has been activated Make sure the appliance is standing upright on a
at surface. If the appliance doesn’t work please
contact De'Longhi Customer Service
To Next Page
Loading...
Need help?
General