Delta ME300 Series User Manual

Chapter 1 IntroductionME300
1-4
1-4 Apply After Service by Mobile Device
1-4-1 Location of Service Link Label
The service link label (Service Label) is pasted on the keypad area on the case body, as shown below.
Frame A, B Frame C, D
1-4-2 Service Link Label
Scan QR Code to apply for service
1. Locate the QR code sticker (as shown above).
2. Use a smartphone to run a QR Code reader App.
3. Point your camera at the QR Code. Hold your camera steady so that the QR code comes into focus.
4. Access the Delta After Service website.
5. Enter your information in the column marked with an orange star.
6. Enter the CAPTCHA and click Submit to complete the application.
Cannot find out the QR Code?
1. Open a web browser on your computer or smartphone.
2. In the browser address bar, enter https://service.deltaww.com/ia/repair
and press Enter.
3. Enter your information in the columns marked with an orange star.
4. Enter the CAPTCHA and click Submit to complete the application.

Delta ME300 Series Specifications

General

Brand	Delta
Model	ME300 Series
Category	DC Drives
Language	English