Delta RPI-H3 Owner's Manual

26
7.2 Inverter Setting
7.2.1 Country Setting
The first time you startup this device. Country Setting is required.
1. In the country setting page, press “SEL” button (NEXT) to select your
located country, press “ENT” button to confirm this page.
2. Press “Enter” button to confirm your country setting.
NOTE:
Figure 7-1 Country Setting
7.2.2 AC Configuration Setting
1. Turn on DC power and wait for the LCD display is ready, then press “SEL”
button until “Country XXX" is displayed.
2. Press and hold both “SEL” and “ENT” buttons for 10 seconds until
“Language XXXXXX” is shown.
3. Press “SEL” until “AC Configurat. XXXXXX” is shown.
4. Press “ENT” to enter AC Configuration Setting page , press “SEL” to flip
between two types of configuration . As your type of configurations is displayed,
press ”ENT” to confirm the setting.

Delta RPI-H3 Specifications

General

Brand	Delta
Model	RPI-H3
Category	Inverter
Language	English