2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
SAFETY GUIDELINES - DEFINITIONS
CALIFORNIA PROPOSITION 65
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to the State of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• leadfromlead-basedpaints,
• crystallinesilicafrombricksandcementandothermasonryproducts,and
• arsenicandchromiumfromchemically-treatedlumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with approved safety equipment, al ways wear NIOSH/OSHA
approved, properly fit ting face mask or res pi ra tor when us ing such tools.
IMPORTANT SAFETY INSTRUCTIONS ........................ 2
SAFETY GUIDELINES - DEFINITIONS ......................... 2
GENERAL SAFETY RULES ........................................... 3
ADDITIONAL SPECIFIC SAFETY RULES .................... 4
FUNCTIONAL DESCRIPTION ....................................... 7
CARTON CONTENTS ................................................... 7
ASSEMBLY ..................................................................... 8
OPERATION ................................................................... 15
TROUBLESHOOTING .................................................... 25
MAINTENANCE .............................................................. 25
SERVICE ......................................................................... 26
ACCESSORIES ............................................................... 26
WARRANTY .................................................................... 26
FRANÇAIS ...................................................................... 27
ESPAÑOL ........................................................................ 52
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY
and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
Read and understand all warnings and operating instructions before using any tool or
equipment. Always follow basic safety precautions to reduce the risk of personal injury. Improper operation,
maintenance, or modification of tools or equipment could result in serious injury and property damage. Our
tools and equipment are designed for certain applications. DO NOT modify and/or use this product for any
application other than that for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written Delta Machinery and we
have advised you. Contact us online at www.deltaportercable.com or by mail at Technical Service Manager, Delta Machinery,
4825 Highway 45 North, Jackson, TN 38305. In Canada,125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)
Information regarding the safe and proper operation of this tool is available from the following sources:
• PowerToolInstitute,1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.org
• NationalSafetyCouncil, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• AmericanNationalStandardsInstitute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1 Safety
Requirements for Woodworking Machines
• U.S.DepartmentofLabor regulations www.osha.gov
SAVE THESE INSTRUCTIONS!
To Next Page
Loading...
Need help?
General
