25
Further information on the safe and proper operation of table saws is available in the Delta “Getting the Most Out of
Your Table Saw” How-To Book, Catalog No. 11-400. Additional Information on table saw safety, including a table saw
safety video, is available from the following:
POWER TOOL INSTITUTE
1300 Sumner Avenue
Cleveland, OH 44115-2851
www.powertoolinstitute.com
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltaportercable.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our website at
www.deltaportercableservicenet.com.
You can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-800-223-7278 to
receive personalized support from highly-trained technicians.
FREE WARNING LABEL REPLACEMENT
If your warning labels become illegible or are missing, call
1-800-223-7278
for a free replacement.
ELECTRICAL HAZARD.
HIGH VOLTAGE EXISTS
WITHIN THIS ENCLOSURE.
RISK OF ELECTRIC SHOCK.
DISCONNECT POWER
BEFORE OPENING DOOR OR
SERVICING.
PELIGRO DE DESCARGA ELÉCTRICA.
DENTRO DE LA CUBIERTA HAY PIEZAS CON
ALTO VOLTAJE.
RIESGO DE DESCARGA ELÉCTRICA.
DESCONECTE LA ALIMENTACIÓN ANTES DE
ABRIR LA PUERTA O REALIZAR TAREAS DE
MANTENIMIENTO.
RISQUE D’ORIGINE ÉLECTRIQUE.
UNE TENSION ÉLEVÉE EST PRÉSENTE À
L’INTÉRIEUR DE CE COFFRET.
RISQUE DE CHOC ÉLECTRIQUE.
COUPER L’ALIMENTATION AVANT D’OUVRIR
LA PORTE POUR MAINTENANCE.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about Delta Machinery, its factory-
owned branches, or an Authorized Warranty Service Center, visit our website at www.deltaportercable.com or call our Customer
Care Center at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and
workmanship. We cannot guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention:
Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number,
etc.)
SERVICE
To Next Page
Loading...
Need help?
General
