Delta STRYKER User Manual

EN
10
Turrets scale zeroing
To realign the zero marks of windage and elevation turrets after
completing the zeroing procedure, you can reset the turret’s
scale to zero.
In the case of the Stryker HD riflescope version with lockable
turrets, to zero the scale, unscrew the ring on the top of the
turret by hand (fig 5). Being careful not to change the position of
the knob, remove the scale and set it so that the „0” point aligns
with the start marker.
Fig. 5

Delta STRYKER Specifications

General

Brand	Delta
Model	STRYKER
Category	Riflescope
Language	English