EN
14
RETICLES CHARACTERISTICS
Stryker HD 4.5-30x56 FFP
LRD-1P, LRD-1T and DLR-1 reticles were designed for ambitious
shooters for PRS and tactical shooting at medium and long
distances. The reticles ensure maximum comfort of shooting
and high functionality throughout the zoom range (4.5-30x).
Their unique features include quick and eective estimation of
distance to the target, wind corrections and moving targets, as
well as quick adjustments at low magnifications. The design of
the reticles allows both the assessment of the distance to the
object of known sizes, as well as correction for bullet trajectory
and windage. The reticles were designed to work in the first focal
plane (FFP) maintaining constant reticle scale over the entire
zoom range. The reticles were scaled in milliradians and are easy
to convert into metric units (1 milliradian = 10 cm per 100m).
LRD-1P
In the center of the reticle there is an illuminated point of
diameter of 0.045 Mil with surrounding, also illuminated,
markers forming a cross. Thin, very precise (0.03 Mil) crosshairs
support aiming. The reticle oers the unique feature of quick
measurements at a level of 0.1 Mil from the center of the
reticle with an accuracy of 0.05 Mil and wind corrections with
an accuracy of 0.1 Mil at a distance of 1 Mil from the center of
the reticle. The horizontal bar at a distance of 7 miles from the
center, as well as the lower vertical at a distance of 12 miles on
the lower vertical bar go into thick bars increasing the visibility of
the cross in dicult lighting conditions, useful especially in the
lower zoom range.
LRD-1T
An extension of the LRD-1P reticle and has been additionally
equipped in the lower section with a set of ballistic markers
for quick adjustments for bullet drop, as well as windage or
derivation adjustments.
To Next Page
Loading...
Need help?
General