EN
12
Illuminated reticle
The riflescope has an 11-step adjustment of the illuminated point
(DLR-1, DLS-1, DLS-2, DLS-3 reticles) or point with additional
markers (LRD-1T and LRD-1P reticles). The brightness adjustment
is located on the riflescope’s body on the left next to the turrets,
integrated with the parallax adjustment knob. See figure 8.
The illumination is powered by a 3V battery (CR2032 battery).
When replacing the battery, first unscrew the battery compartment
lid. Remember to insert the battery with the correct polarity.
Power adjustment
To change magnification, simply rotate the magnification ring to
align the desired number on the power scale with the index dot.
The adjustment ring is located between the eyebell and tube of
the riflescope. For your comfort of use, the ring has an additional
lever. (Fig. 7)
Fig. 7
Fig. 8
To Next Page
Loading...
Need help?
General