Chapter 10 Auto-tuning Process | VFD-ED
10-3 Descriptions of Tuning Steps
10-3-1 Basic Parameter Settings
Pr.00-02 Parameter Reset
Press
Press
Set Pr.00-02=9 or 10: Reset all parameters to the default. If the keypad is locked by a
password, enter the password to reset to the default. The password is also erased.
Pr.00-14 Master Frequency Command Source
Press
Press
Setting values:
1: RS-485 serial communication or digital keypad (KPC-CC01)
2: External analog input (See Pr.03-00)
3: Digital terminal inputs
4: Direct docking mode only, contact Delta for more information.
Determines the drive’s master frequency source.
Pr.00-15 Operation Command Source
Press
To Next Page
Loading...
Need help?
General