Wearing
o
Wearing the headphones
These headphones are supplied with different sizes of ear rings and ear
tips for adjusting the fit. Use the combination that best suits your ears in
order to find the most comfortable fit. (v p. 20)
Wear the headphones as described below.
1
Insert the ear tip of the “L” of the headphones into the
left ear, and the ear tip of the “R” into the right ear.
0
When using the Comply (TM) form ear tips that are already
attached to the headphones, mold the ear tips with your fingers
before inserting in your ears.
2
Lift the hook parts of the headphones over the ears and
then hook them behind the ears as shown in the figure.
.
o
Adjusting the length of the headphones cable
Attach the supplied slider to the headphones cable as shown in the figure
and then adjust the length of the cable.
Setting the slider to the position in the figure will make it difficult for any
vibration sound resulting from the cable moving up and down during
jogging to be transmitted to the ears.
.
NOTE
0
Do not forcefully pull or bundle the cable. The cable may break resulting in the
inability to output sound.
0
After attaching the slider, check that it does not become detached by vibration.
Contents
Preparation Connections Operation
Troubleshooting
Appendix
8
To Next Page
Loading...
Need help?
General
Weight and Dimensions
