Denon AVC-A1HD User Manual


Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting
• Connect the cables to be used (vpage 9 “Video Conversion Function”).
• With HDMI connections, the video and audio signals can be transferred with a single cable.
• To output the audio signals to the monitor with HDMI connections, set GUI menu “Manual Setup”
– “HDMI Setup” – “Audio” to “TV” (vpage 31).
Connecting the Monitor
47*%&0
*/
7*%&0
$0.10/&/57*%&0
: 1
# 13
7*%&0
*/
)%.*
*/ */
47*%&0
065
"6%*07*%&0
$0.10/&/57*%&0
: 1
# 13
7*%&0
065 065
"6%*0$0"9*"-
065
3-
065065
)%.*
R
L
R
L
Monitor
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
Connecting the Playback Components
DVD Player
• Connect the cables to be used.
• With HDMI connections, the video and audio signals can be transferred with a single cable.
DVD player
NOTE
• The component video connectors may be indicated differently on your monitor. For details, see the
monitor’s operating instructions.
• The audio signals output from the HDMI connectors are only the HDMI input signals.
• Connect an HDP (High-Definition Player) in the same way.
• When using an optical cable or a BNC cable for the digital audio connection, make the settings at GUI
menu “Source Select” – “DVD” – “Assign” – “Digital” (vpage 43).
• When using a BNC cable for the component video connection, make the settings at GUI menu “Source
Select” – “DVD” – “Assign” – “Component” (vpage 43).
Connections

Denon AVC-A1HD Specifications

General

Brand	Denon
Model	AVC-A1HD
Category	Amplifier
Language	English