Denon AVC-A1HD User Manual


Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
a EXT. IN Setup
Setup playback method for analog signals inputted from external
input connectors (EXT. IN).
Audio Setup
Make settings for audio playback.
F Menu tree F
Manual Setup
Audio Setup
a EXT. IN Setup
s 2ch Direct/Stereo
d Downmix Option
f Auto Surround Mode
g Manual EQ
s 2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select “Custom”.
[Selectable items]
Basic
z
Custom
z: Use the same settings as in “Speaker Setup”.
Front
Select front speaker size.
[Selectable items]
Large Small
Subwoofer
Select subwoofer use.
[Selectable items]
Yes No
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE–THX– LFE+Main
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
THX 40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz
150Hz 200Hz 250Hz
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
0.00m ~ 18.00m
Distance FR
Set distance from listening position to front right speaker.
[Variable range]
0.00m ~ 18.00m
d Downmix Option
Set dynamic range for downmix playback of Dolby Digital sources.
[Selectable items]
ON OFF
• Set this to “ON” if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers, the
playback sound is down-mixed and output from the front speakers.
f Auto Surround Mode
Make setting for memorizing surround mode setting for each input
signal type.
[Selectable items]
ON OFF
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
q Analog and PCM 2-channel signals
w Dolby Digital and DTS 2-channel signals
e Dolby Digital and DTS multi-channel signals
r Multi-channel signals other than Dolby Digital and DTS (PCM,
DSD, etc.)
• When playing in the PURE DIRECT mode, the surround mode does
not change even if the input signal is changed.
Surround Speaker
Select the surround speakers to use.
[Selectable items]
A B A+B
Subwoofer Level
Set the subwoofer level for playback.
Select according to the player in use.
[Selectable items]
0dB +5dB +10dB +15dB
We recommend setting to “+15dB”.
This can be set when GUI menu “Speaker Setup“ – “Speaker
Confi guration“ – “Surround A“ and “Surround B“ are used (vpage
28).
Setup

Denon AVC-A1HD Specifications

General

Brand	Denon
Model	AVC-A1HD
Category	Amplifier
Language	English