III
11 REMOTE CONTROL UNIT
l
Turn on the power of the different components before operating them
1
Set mode switch 1 to “AUDIO”.
AUDIO.
l
VlOEO-
A
Set mode switch 2 to the posrtion for the component to be
operated. (CD, CDR/MD or Tape deck)
3
Operate the audio component.
l
For details, refer to the component’s operating instructrons.
.X While this remote control is compatible with a wide range of infrared controlled components, some models of components may not
be operated with this remote control.
1. CD player (CD) and CD recorder and MD recorder
2. Tape deck (TAPE) system buttons
(CDi/WiDI system buttons
44
Rewrnd
-,-
Manual search (forward and reverse)
n
: stop
b
: Play
l44,w
Auto search (cue)
II
DISC :
Pause
Swatch discs
SKIP+
(for CD changers only)
bb
n
b
4
AB
3. Tuner system buttons
SHIFT
CHANNEL
+, -
TUNING
+, -
BAND
MODE
MEMORY
Fast-forward
stop
Forward play
Reverse play
Switch between decks A and B
Swatch preset channel range
Preset channel
up/down
Frequency
up/down
Switch between the AM and FM bands
Swatch between auto and mono
Preset rnernory
NOTE:
l
TUNER can be operated when the switch IS at “AUDIO” position
24