32
15
LISTENING TO THE RADIO
Auto tuning
1
2
3
3
Press the TUNING + or – button.
• Automatic searching begins, then stops
when a station is tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo
broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators
turn off.
Manual tuning
1
Set the input function to “TUNER”.
3
Press the BAND button to set the manual
tuning mode.
Check that the display’s “AUTO” indicator
turns off.
4
Press the TUNING + or – button to tune in the
desired station.
The frequency changes continuously when the
button is held in.
2
Watching the display, press the BAND button
to select the desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO”
indicator turns off.
1
Set the input source to “TUNER”.
2
Watching the display, press the BAND button
to select the desired band (AM or FM) and to
set the auto tuning mode.
FUNCTION / SELECT
BAND
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Remote control unit)
ENGLISH
TUNING
(Main unit)
Preset stations
Preparations:
Use the “Auto tuning” or “Manual tuning” operation
to tune in the station to be preset in the memory.
1
Press the MEMORY button.
2
Press the SHIFT button and
select the desired memory
block (A to E).
4
Press the MEMORY button
again to store the station in
the preset memory.
To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to E.
3
Press the CHANNEL + or –
button to select the desired
preset channel (1 to 8).
NOTE:
• Please make sure the “AUDIO” position of
the slide switch on the remote control unit.
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
A 1 FM 8 7.5 0M
Display
Lit
FUNCTION / SELECT
(Main unit) (Remote control unit)
BAND
(Main unit) (Remote control unit)
BAND
(Main unit) (Remote control unit)
(Remote control unit)
TUNING
(Main unit)