Denon AVR-S770H User Manual

Speaker configuration and “Amp Assign” settings
This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing
the “Amp Assign” settings to suit the application, such as 7.1-channel systems and 2-channel systems for multi-zone playback. (v p. 188)
Perform “Speaker Layout” settings to suit the number of rooms and speaker configuration to be installed. (v p. 188)
Playback speaker in each zone
“Amp Assign” settings
“Speaker Layout” settings
MAIN ZONE ZONE2 Height Surround Back
5.1-channel playback Not used
Can be set in all “Amp
Assign
” settings.
No No
7.1-channel (surround back) Not used 7.1ch (Default) No 2 spkrs
7.1-channel (front height) Not used 7.1ch (Default) Front Height No
7.1-channel (top front) Not used 7.1ch (Default) Top Front No
7.1-channel (top middle) Not used 7.1ch (Default) Top Middle No
7.1-channel (front Dolby Atmos Enabled speaker) Not used 7.1ch (Default) Front Dolby No
7.1-channel (surround Dolby Atmos Enabled speaker) Not used 7.1ch (Default) Surround Dolby No
5.1-channel
2-channel
(Speaker out)
5.1ch + ZONE2 No No
0
The sound mode that can be selected varies according to the speaker configuration.
Contents Connections Playback Settings Tips Appendix
38
Front panel Display Rear panel Remote Index

Denon AVR-S770H Specifications

General

Brand	Denon
Model	AVR-S770H
Category	Stereo Receiver
Language	English