EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-S970H

Denon AVR-S970H User Manual

Denon AVR-S970H
283 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #225 background imageLoading...
Page #225 background image
Power does not turn on / Power is turned off
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. (v p. 63)
Power automatically turns off.
0
The sleep timer is set. Turn on the power again. (v p. 130)
0
“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To disable “Auto Standby”, set “Auto Standby” on
the menu to “Off”. (v p. 209)
Power turns off and the power indicator flashes in red approx. every 2 seconds.
0
The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off, wait about an hour until this unit cools down
sufficiently, and then turn the power on again. (v p. 271)
0
Please re-install this unit in a place having good ventilation.
Power turns off and the power indicator flashes in red approx. every 0.5 seconds.
0
Check the speaker connections. The protection circuit may have been activated because speaker cable core wires came in contact with each other or a
core wire was disconnected from the connector and came in contact with the rear panel of this unit. After unplugging the power cord, take corrective
action such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire. (v p. 35)
0
Turn down the volume and turn on the power again. (v p. 65)
0
This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.
Power does not turn off even when the power button is pressed, and the display shows “ZONE2 On”.
0
The power supply of ZONE2 is turned to ON. To turn off the power supply of this unit (standby), press the ZONE2 ON/OFF on the main unit, or press
the POWER X button after pressing the ZONE2 button on the remote control unit to turn off the power supply of ZONE2.
Contents
Connections Playback Settings Tips Appendix
225
Front panel Display Rear panel Remote Index

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S970H and is the answer not in the manual?

Denon AVR-S970H Specifications

General IconGeneral
Receiver type-
Pre-out channels0.2
Pre-out connectivityYes
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)125 W
Power output per channel (20-20KHz@8 Ohm)85 W
HDMI in6
Audio (L/R) in4
USB ports quantity1
Digital audio coaxial in0
Digital audio optical in2
Audio (L/R) out7
Audio formats supportedAAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bandsAM, FM
Optical drive includedNo
DisplayVFD
HDCP version2.3
Product colorBlack
Audio decodersDTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
Volume controlRotary
Number of products included1 pc(s)
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Package weight11500 g
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width434 mm
Height167 mm
Weight9500 g

Related product manuals