EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-S970H

Denon AVR-S970H User Manual

Denon AVR-S970H
283 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #226 background imageLoading...
Page #226 background image
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
0
Batteries are worn out. Replace with new batteries. (v p. 10)
0
Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. (v p. 10)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the q and w marks. (v p. 10)
0
The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
remote control sensor will not be exposed to strong light.
0
The operation target zone does not correspond to the zone setting specified on the remote control unit. Press the MAIN or ZONE2 button to select the
operating zone of the remote control. (v p. 150)
0
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
Display on this unit shows nothing
Display is off.
0
Set “Brightness” on the menu to something other than “Off”. (v p. 213)
0
When the sound mode is set to “Pure Direct”, the display is off. (v p. 120)
Contents
Connections Playback Settings Tips Appendix
226
Front panel Display Rear panel Remote Index

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S970H and is the answer not in the manual?

Denon AVR-S970H Specifications

General IconGeneral
Receiver type-
Pre-out channels0.2
Pre-out connectivityYes
Audio output channels7.1 channels
Power output per channel (1KHz@6 Ohm)125 W
Power output per channel (20-20KHz@8 Ohm)85 W
HDMI in6
Audio (L/R) in4
USB ports quantity1
Digital audio coaxial in0
Digital audio optical in2
Audio (L/R) out7
Audio formats supportedAAC, ALAC, FLAC, MP3, WAV, WMA
Supported radio bandsAM, FM
Optical drive includedNo
DisplayVFD
HDCP version2.3
Product colorBlack
Audio decodersDTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
Volume controlRotary
Number of products included1 pc(s)
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Package weight11500 g
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width434 mm
Height167 mm
Weight9500 g

Related product manuals