Audio Delay
While viewing video, manually adjust the time to delay audio output so
that the video and audio are synchronized.
0ms (Default) – 200ms
%
•This item can be set within the range of 0 to 100 ms when “Auto Lip Sync”
(vpage 132) is set to “On” and when a TV compatible with Auto Lip Sync is
connected.
•Store “Audio Delay” for each input source.
•Audio Delay for game mode can be set when “Video Mode” (vpage134) is set
to “Auto” or “Game”.
Volume
Set the MAIN ZONE (room where the unit is located) volume setting.
2 Scale
Set how volume is displayed.
0 – 98 (Default) : Display in the range 0 (Min) to 98.
–79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0
dB.
%
•The “Scale” setting applies to all zones.
2 Limit
Make a setting for maximum volume.
60 (–20dB) / 70 (–10dB) / 80 (0dB)
O (Default)
2 Power On Level
Define the volume setting that is active when the power is turned on.
Last (Default) : Use the memorized setting from the last session.
Mute : Always use the muting on condition when power is turned on.
1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.
2 Mute Level
Set the amount of attenuation when muting is on.
Full (Default) : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
