On Screen Display
Select the on-screen display user interface preferences.
2 Volume
Sets where to display the master volume level.
Bottom (Default) : Display at the bottom.
Top : Display at the top.
O : Turn display o.
%
•When the master volume display is hard to see when superimposed text
(closed captioning) or movie subtitles are present, set to “Top”.
2 Info
Displays status of operation temporarily when the sound mode is
changed, or input source is switched.
On (Default) : Turn display on.
O : Turn display o.
2 Now Playing
Sets the display time for the playback display when the input source is
“NETWORK”, “iPod/USB” or “TUNER”.
Always On (Default) : Show display continuously.
Auto O : Show display for 30 seconds after operation.
TV Format
Set the video signal format to be output for the TV you are using.
2 Format
PAL (Default) : Select PAL output.
NTSC : Select NTSC output.
%
•“Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“V.Format:<PAL>” appears on the display.
2. Use the main unit’s TUNER PRESET CH +, – and set the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
•When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
