Denon AVR-X2000 User Manual

179
Appendix
SettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
2 USB memory devices cannot be played back
Symptom Cause / Solution Page
“No Connection” is displayed. •This unit may not recognize the USB memory device due to poor connection, etc. Make sure
that the connection is made properly by taking actions such as disconnecting and reconnecting
the USB memory device.
•USB memory devices of a mass storage class or those compatible with MTP are supported.
•This unit does not support a connection through a USB hub. Connect the USB memory device
directly to the USB port.
•The USB memory device must be formatted to FAT16 or FAT32.
•Not all USB memory devices are guaranteed to work. Some USB memory devices are not
recognized. When using a type of portable hard disc drive compatible with the USB connection
that requires power from an AC adapter, use the AC adapter that came with the drive.
36
–
–
–
–
Files on the USB memory device are
not displayed.
•Files of a type not supported by this unit are not displayed.
•This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in
total. Modify the folder structure of the USB memory device.
•When multiple partitions exist on the USB memory device, only files on the first partition are
displayed.
48
–
–
Files on a USB memory device cannot
be played.
•Files are created in a format that is not supported by this unit. Check the formats supported
by this unit.
•You are attempting to play a file that is copyright protected. Files that are copyright protected
cannot be played on this unit.
189
–

Denon AVR-X2000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (1KHz@6 Ohm)	125 W
Power output per channel (20-20KHz@8 Ohm)	95 W
HDMI in	7
AC (power) in	Yes
Audio (L/R) in	4
Composite video in	2
Component video (YPbPr/YCbCr) in	1
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES, DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W

Weight and Dimensions

Depth	330 mm
Width	434 mm
Height	167 mm
Weight	9500 g