o
No video is shown on the TV
Symptom Cause / Solution Page
No picture appears.
0
Check the connections for all devices. 39
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Match the input settings to the input connector of the TV connected to this unit.
159
0
Check that the proper input source is selected.
54
0
Check the video input connector setting. 159
0
Check that the resolution of the player corresponds to that of the TV. 193
0
Check whether the TV is compatible with copyright protection (HDCP). If connected to a device not
compatible with HDCP, video will not be output correctly.
221
0
The HDMI signal cannot be converted to an analog signal. Use analog connections. 222
0
Use an “High Speed HDMI cable with Ethernet” or “High speed cable” that comes with the HDMI logo if
you wish to playback 4K (60/50 Hz) video.
－
No video is shown on the
TV with the DVI-D
connection.
0
With the DVI-D connection, on some device combinations, devices may not function properly due to the
copy guard copyright protection (HDCP).
221
No video from an input
source such as a game
console is shown on the
TV.
0
When special video signals are input from a game console, etc., the video conversion function may not
function. Connect the input connector to the monitor output connector of the same type.
－
While the menu is being
displayed, no video is
shown on the TV.
0
The video being played will not appear in the background of the menu when the menu is operated during
playback of the following video signals.
- Some images of 3D video contents
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- 4K video
－
Contents Connections Playback Settings Tips Appendix
209
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
