EasyManuals Logo
Home>Denon>Receiver>AVR-X2100W

Denon AVR-X2100W User Manual

Denon AVR-X2100W
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #215 background imageLoading...
Page #215 background image
o
Music files on PC or NAS cannot be played back
Symptom Cause / Solution Page
Files stored on a computer
cannot be played.
0
Files are stored in a non-compatible format. Record in a compatible format. 226
0
Files that are copyright protected cannot be played on this unit.
0
The set’s USB port cannot be used for connection to a computer.
0
Media sharing settings are not correct. Change media sharing settings so that the unit can access the
folders on your computer.
84
Server is not found, or it is
not possible to connect to
the server.
0
The computer’s or router’s firewall is activated. Check the computer’s or router’s firewall settings.
0
Computer’s power is not turned on. Turn on the power.
0
Server is not running. Launch the server.
0
Set’s IP address is wrong. Check the set’s IP address.
181
Music files on PC cannot
be played back.
0
Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC
to this unit through the network.
50
Files on PC or NAS are not
displayed.
0
Files of a type not supported by this unit are not displayed. 226
Music stored on a NAS
cannot be played.
0
If you use a NAS in conformity with the DLNA standard, enable the DLNA server function in the NAS
setting.
0
If you use a NAS that does not conform with the DLNA standard, play the music via a PC. Set Windows
Media Player’s media sharing function and add NAS to the selected play folder.
84
0
If connection is restricted, set audio equipment as the connection target.
o
Various online services cannot be played
Symptom Cause / Solution Page
Various online services
cannot be played.
0
The online service may have been discontinued.
Contents Connections Playback Settings Tips Appendix
215
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X2100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2100W and is the answer not in the manual?

Denon AVR-X2100W Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)150 W
Power output per channel (20-20KHz@8 Ohm)95 W
HDMI in8
Composite video in2
Component video (YPbPr/YCbCr) in1
Speakers connectivity type-
Ethernet LANYes
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Optical drive includedNo
Product colorBlack
Audio decodersDolby Digital EX, Dolby Pro Logic IIx, Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD
Apple docking compatibilityiPhone, iPod
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height167 mm
Weight9700 g

Related product manuals