EasyManuals Logo
Home>Denon>Stereo Receiver>AVR-X2500H

Denon AVR-X2500H Service Manual

Denon AVR-X2500H
173 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
4. Protection Pass Mode 5. Network Initialization Mode
4.1. Actions
This mode allows the power to be turned on without activating protections.
This mode functions in the same way as normal power-on, except that protections are not activated.
When using the protection pass mode, do not connect speakers to the speaker terminals.
4.2. Operations
AVR-X2500H
While holding down buttons "
TUNER PRESET CH +
", "
ZONE2 SOURCE
" and "
STATUS
"
simultaneously, press the power button to turn on the power.
AVR-S940H
While holding down buttons "
ZONE2 SOURCE
", "
TUNER PRESET CH +
" and "
TUNE +
"
simultaneously, press the power button to turn on the power.
The device returns to the normal display message after the following is displayed.
Protection Pass
This is displayed for 5 seconds before returning to the normal display.
5.1. Actions
The following items are initialized.
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
5.2. Operations
AVR-X2500H
When the power is on and the input source is HEOS Music, press and hold the "
TUNERPRESET CH
+
" and "
ZONE2ON/OFF
" buttons for more than 3 seconds.
AVR-S940H
When the power is on and the input source is HEOS Music, press and hold the "
ZONE2 SOURCE
" and
"
ZONE2 ON/OFF
" buttons for more than 3 seconds.
Initializing Display
Network Reset...
Complete Display
Completed
This is displayed for 5 seconds before returning to the normal display.
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
138

Other manuals for Denon AVR-X2500H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X2500H and is the answer not in the manual?

Denon AVR-X2500H Specifications

General IconGeneral
HDMI in8
Composite video in2
Ethernet LAN (RJ-45) ports1
AirPlayNo
Display-
Sample rate196 kHz
HDCP version2.2
Product colorBlack
Audio decodersDSD, DTS-HD, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD
Volume controlRotary
RS-232 interfaceYes
Connectivity technologyWired & Wireless
Receiver typeSurround
Frequency range20 - 20000 Hz
Output impedance8 Ω
Input sensitivity200 mV
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)95 W
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)500 W
Audio formats supportedAAC, ALAC, DSD, FLAC, MP3, WAV, WMA
AM band range520 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Internet radio services supportedDeezer, Napster, Pandora, SIRIUS Internet Radio, Spotify, Tidal, TuneIn, iHeartRadio
Supported graphics resolutions3840 x 2160
Weight and Dimensions IconWeight and Dimensions
Depth340.3 mm
Width434.3 mm
Height167.6 mm
Weight9389 g

Related product manuals