Name: Denon AVR-X3000
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

113

Appendix

TipsSettingsConnections

Contents

Front panel Display Rear panel IndexRemote

Playback

HDMI control function

A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with

another device via the HDMI cable connection. Not all HDMI-equipped devices have this capability.

Setting procedure

Set the HDMI output connector corresponding with the

HDMI control function.

Set “HDMI Control” (vpage145) to “On”.

Turn the power on for all the devices connected by

HDMI cable.

Set the HDMI control function for all devices connected

by HDMI cable.

•Please consult the operating instructions for the connected

devices to check the settings.

•Carry out steps 2 and 3 should any of the devices be unplugged.

Switch the television input to the HDMI input connected

to this unit.

Switch this unit input to the HDMI input source and

check if the picture from the player is ok.

When you turn the TV’s power to standby, check that

the power of this unit also goes to standby.

NOTE

•Some functions may not operate depending on the connected TV or player. Check

the owner’s manual of each device for details beforehand.

•The HDMI ZONE2 function is not compatible with the HDMI control function.

•When the HDMI ZONE2 function is used with “HDMI Control” in the menu set to

“On”, the HDMI ZONE2 function may not fully work.

Other manuals for Denon AVR-X3000

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X3000 and is the answer not in the manual?

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Audio (L/R) in	5
Composite video in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Cables included	AC