143
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Video
Make video-related settings.
Picture Adjust
Picture quality can be adjusted.
%
•Can be set when the “Video Conversion” (vpage146) setting is “On”.
•Can be set when “HDMI”, “COMP” or “VIDEO” (vpage 150) is assigned for
each input source.
2 Picture Mode
Select the desired picture mode according to the video content and
your viewing environment.
Standard : The standard mode suited for most living room viewing
environments.
Movie : A mode suited for watching movies in a dark room such as a
theater room.
Vivid : A mode that makes graphic images for games, etc. brighter
and more vivid.
Streaming : A mode suited for low bit rate video sources.
Custom : Adjusts the picture quality manually.
O : No picture quality adjustment is done with this unit.
%
•You can also press OPTION to make these settings from “Picture Mode”
(vpage99) in the option menu.
•The default settings are as follows.
•For “NETWORK” and “iPod/USB” input sources : Streaming
•For input sources other than “Network” and “iPod/USB” : O
2 Contrast
Adjust picture contrast.
–6 – +6 (Default : 0)
2 Brightness
Adjust picture brightness.
0 (Default) – +12
2 Saturation
Adjust picture chroma level (color saturation).
–6 – +6 (Default : 0)
2 Hue
Adjust green and red balance. Also called Tint.
–6 – +6 (Default : 0)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
