Do you have a question about the Denon AVR-X3000 and is the answer not in the manual?
Receiver type | Surround |
---|---|
Frequency range | 10 - 100000 Hz |
Output impedance | 16 Ω |
Input sensitivity | 200 mV |
Pre-out connectivity | Yes |
Audio output channels | 7.1 channels |
Signal-to-Noise Ratio (SNR) | 102 dB |
Total Harmonic Distortion (THD) | 0.08 % |
Power output per channel (1KHz@6 Ohm) | 135 W |
Power output per channel (20-20KHz@8 Ohm) | 105 W |
HDMI in | 7 |
Audio (L/R) in | 5 |
Composite video in | 3 |
Ethernet LAN (RJ-45) ports | 1 |
Component video (YPbPr/YCbCr) in | 2 |
Connectivity technology | Wired |
Speakers connectivity type | Banana connector |
Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
Image formats supported | JPG |
Wi-Fi | No |
RDS features | PTY, TP |
AM band range | 520 - 1710 kHz |
FM band range | 87.5 - 108 MHz |
Supported radio bands | AM, FM |
Internet radio services supported | Spotify, vTuner |
Supported video modes | 1080i, 1080p, 480p, 576p, 720p |
Display | VFL |
Color depth | 24 bit |
Aspect ratio | 4:3, 16:9 |
Product color | Black |
Audio decoders | DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Apple docking compatibility | iPhone, iPod |
AC input voltage | 230 V |
AC input frequency | 50 - 60 Hz |
Power consumption (standby) | 0.1 W |
Power consumption (typical) | 600 W |
Cables included | AC |
Depth | 379 mm |
---|---|
Width | 434 mm |
Height | 167 mm |
Weight | 10700 g |