EasyManuals Logo
Home>Denon>Receiver>AVR-X3100W

Denon AVR-X3100W User Manual

Denon AVR-X3100W
297 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #223 background imageLoading...
Page #223 background image
o
No sound comes out
Symptom Cause / Solution Page
No sound comes out of
speakers.
0
Check the connections for all devices. 29
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
29
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. 29
0
Check that a proper input source is selected. 59
0
Adjust the volume. 60
0
Cancel the mute mode. 60
0
Check the digital audio input connector setting. 176
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and PRE OUT connector.
15
No sound comes out when
using the DVI-D
connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
Contents Connections Playback Settings Tips Appendix
223
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X3100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X3100W and is the answer not in the manual?

Denon AVR-X3100W Specifications

General IconGeneral
Receiver typeSurround
Speaker selectorA+B
Audio output channels7.1 channels
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)180 W
Power output per channel (20-20KHz@8 Ohm)105 W
HDMI in8
Remote control in1
Composite video in3
Multichannel audio input typeTerminals
Component video (YPbPr/YCbCr) in2
12V triggerYes
Speakers connectivity type-
Audio formats supportedAAC, AIFF, FLAC, MP3, WAV, WMA
Supported radio bandsFM
Product colorBlack
Audio decodersDolby Digital EX, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Volume controlRotary
Apple docking compatibilityNot supported
Power consumption (standby)0.1 W
Power consumption (typical)600 W
Weight and Dimensions IconWeight and Dimensions
Depth388 mm
Width434 mm
Height167 mm
Weight10700 g

Related product manuals